Extreme Networks EAS 100-24t Switch CLI - Delete Vlan_Translation CVID; Show Vlan_Translation CVID

Q-in-Q Commands
Extreme Networks EAS 100-24t Switch CLI Manual
187
Example usage:
To create a VLAN translation rule which assigns add S-VLAN 100 to C-VLAN 1-10:
Example usage:
To delete all C-VID VLAN translation rules:
#create vlan_translation add cvid 1-10 svid 100
Command: create vlan_translation add cvid 1-10 svid 100
Success.
#
delete vlan_translation cvid
Purpose Used to delete VLAN translation rules.
Syntax delete vlan_translation cvid [<vidlist> | all]
Description This command is used to delete VLAN translation rules.
Parameters cvid - Specifies C-VID rules in VLAN translation.
Restrictions Only Administrator-level users can issue this command.
#delete vlan_translation cvid all
Command: delete vlan_translation cvid all
Success.
#
show vlan_translation cvid
Purpose Used to show VLAN translation rules.
Syntax show vlan_translation cvid {<vidlist>}
Description The command used to show configured VLAN translation configurations.
Parameters cvid - The Q-in-Q translation rules for the specified C-VID list.
Restrictions None.