Extreme Networks EAS 100-24t Switch CLI - Config Terminal_Line; Show Terminal_Line

Chapter 3: Fundamentals
Extreme Networks EAS 100-24t Switch CLI Manual
38
Example usage:
To trace the routed path between the switch and 10.48.74.121:
Example usage:
To configure the terminal line to display 30 rows:
Restrictions Only Administrator-level users can issue this command.
#traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121 probe 3
1 <10 ms. 10.48.74.121
1 <10 ms. 10.48.74.121
1 <10 ms. 10.48.74.121
#
config terminal_line
Purpose Used to configure the number of rows which can be displayed on a screen.
Syntax config terminal_line [default | <value 20-80>]
Description This command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#config terminal_line 30
Command: config terminal_line 30
Success.
#
show terminal_line
Purpose Used to show the number of rows which can be displayed on the screen.
Syntax show terminal_line
Description This command is used to show the number of rows which can be displayed on
the screen.
Parameters None.
Restrictions None.
traceroute