Extreme Networks EAS 100-24t Switch CLI - Enable Mirror; Disable Mirror

Chapter 5: Layer 2 Features
Extreme Networks EAS 100-24t Switch CLI Manual
174
Example usage:
To add the mirroring ports:
Example usage:
To delete the mirroring ports:
Example usage:
To enable mirroring configurations:
#config mirror port 1 add source ports 2-7 both
Command: config mirror port 1 add source ports 2-7 both
Success.
#
#config mirror port 1 delete source ports 2-4 both
Command: config mirror 1 delete source ports 2-4 both
Success.
#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax enable mirror
Description This command, combined with the disable mirror command below, allows the
user to enter a port mirroring configuration into the switch, and then turn the
port mirroring on and off without having to modify the port mirroring
configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable mirror
Command: enable mirror
Success.
#
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax disable mirror