Extreme Networks EAS 100-24t Switch CLI User Manual

Network Monitoring Commands
Extreme Networks EAS 100-24t Switch CLI Manual
91
Example usage:
To display the errors of the port 3:
Example usage:
To display the current CPU utilization:
#show error ports 3
Command: show error ports 3
Port Number : 3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization cpu
Purpose This command is used to display the CPU utilization statistics.
Syntax show utilization cpu
Description This command is used to display the CPU utilization statistics.
Parameters None.
Restrictions None.
#show utilization cpu
Command: show utilization cpu
CPU Utilization :
------------------------------------------------------------------
Five Seconds - 3% One Minute - 2% Five Minutes - 5%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization dram
Purpose This command is used to display the DRAM utilization statistics.
Syntax show utilization dram
Description This command is used to display the DRAM utilization statistics.
Parameters None.
Restrictions None.

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English