Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 9: Security
Extreme Networks EAS 100-24t Switch CLI Manual
302
Example usage:
To view the SSL status on the switch:
Example usage:
To view certificate file information on the switch:
Description This command is used to view the SSL status on the switch or to view the
SSL certificate file information currently implemented on the switch.
Parameters None.
Restrictions None.
#show ssl
Command: show ssl
SSL Status Disabled
RSA_WITH_RC4_128_MD5 0x0004 Enabled
RSA_WITH_3DES_EDE_CBC_SHA 0x000A Enabled
DHE_DSS_WITH_3DES_EDE_CBC_SHA 0x0013 Enabled
RSA_EXPORT_WITH_RC4_40_MD5 0x0003 Enabled
#
# show ssl certificate
Command: show ssl certificate
Loaded with RSA Certificate!
#
download ssl certificate
Purpose Used to download a certificate file for the SSL function on the switch.
Syntax download ssl certificate <ipaddr> certfilename <path_filename 64>
keyfilename <path_filename 64>
Description This command is used to download a certificate file for the SSL function on
the switch from a TFTP server. The certificate file is a data record used for
authenticating devices on the network. It contains information on the owner,
keys for authentication and digital signatures. Both the server and the client
must have consistent certificate files for optimal use of the SSL function. The
switch only supports certificate files with .der file extensions.
Parameters <ipaddr> - Enter the IP address of the TFTP server.
certfilename <path_filename 64> - Enter the path and the filename of the
certificate file users wish to download.
keyfilename <path_filename 64> - Enter the path and the filename of the key
exchange file users wish to download.
Restrictions Only Administrator-level users can issue this command.
show ssl

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English