Extreme Networks EAS 100-24t Switch CLI - Show Switch

Chapter 3: Fundamentals
Extreme Networks EAS 100-24t Switch CLI Manual
20
Example usage:
To display the way that the users logged in:
#show session
Command: show session
ID Live Time From Level Name
-- ------------ --------------------------------------- ----- ---------------
8 0:2:26.850 Serial Port 4 admin
Total Entries: 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show switch
Purpose Used to display general information about the switch.
Syntax show switch
Description This command is used to display information about the switch.
Parameters None.
Restrictions None.