Extreme Networks EAS 100-24t Switch CLI User Manual

Network Monitoring Commands
Extreme Networks EAS 100-24t Switch CLI Manual
95
Example usage:
To enable the syslog function on the switch:
Example usage:
To disable the syslog function on the switch:
Description This command is used to enable the system log to be sent to a remote host.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable syslog
Command: enable syslog
Success.
#
disable syslog
Purpose Used to disable the system log to be sent to a remote host.
Syntax disable syslog
Description This command is used to disable the system log to be sent to a remote host.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable syslog
Command: disable syslog
Success.
#
show syslog
Purpose Used to display the syslog protocol status as enabled or disabled.
Syntax show syslog
Description This command is used to display the syslog status as enabled or disabled.
Parameters None.
Restrictions None.
enable syslog

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English