Extreme Networks EAS 100-24t Switch CLI - Delete Account; Show Session

Basic Switch Commands
Extreme Networks EAS 100-24t Switch CLI Manual
19
Example usage:
To display the accounts that have been created:
Example usage:
To delete the user account “EXN”:
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#show account
Command: show account
Current Accounts:
Username Access Level
---------- ------------
EXN Admin
Total Entries: 1
#
delete account
Purpose Used to delete an existing user account.
Syntax delete account <username>
Description This command is used to delete a user account that has been created using
the create account command.
Parameters <username> – The name of the account to be deleted.
Restrictions Only Administrator-level users can issue this command.
#delete account EXN
Command: delete account EXN
Success.
#
show session
Purpose Used to display a list of currently logged-in users.
Syntax show session
Description This command is used to display a list of all the users that are logged-in at the
time the command is issued.
Parameters None.
Restrictions None.
show account