Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 4: Management
Extreme Networks EAS 100-24t Switch CLI Manual
88
Example usage:
To configure the switch name for “MainSwitch”:
Example Usage:
To enable RMON:
Restrictions Only Administrator-level users can issue this command.
#config snmp system_name MainSwitch
Command: config snmp system_name MainSwitch
Success.
#
enable rmon
Purpose Used to enable RMON on the switch.
Syntax enable rmon
Description This command is used, in conjunction with the disable rmon command below,
to enable and disable remote monitoring (RMON) on the switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable rmon
Command: enable rmon
Success.
#
disable rmon
Purpose Used to disable RMON on the switch.
Syntax disable rmon
Description This command is used, in conjunction with the enable rmon command above,
to enable and disable remote monitoring (RMON) on the switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
config snmp system_name

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English