Extreme Networks EAS 100-24t Switch CLI User Manual

MLD Snooping Commands
Extreme Networks EAS 100-24t Switch CLI Manual
153
Example usage:
To disable MLD snooping on the switch:
Example usage:
To display MLD snooping:
# disable mld_snooping
Command: disable mld_snooping
Success.
#
show mld_snooping
Purpose Used to display the current configuration of MLD snooping on the switch.
Syntax show mld_snooping {[vlan <vlan_name 32> | vlanid <vidlist>]}
Description This command is used to display the current MLD snooping configuration on
the switch.
Parameters <vlan_name 32> - The name of the VLAN for which you want to view the MLD
snooping configuration.
<vidlist> - A list of VIDs.
If no parameter specified, the system will display all current MLD snooping
configuration.
Restrictions None.
# show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Enabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Querier Router Behavior : Non-Querier
State : Disabled
Fast Done : Disabled
Receive Query Count : 0
Total Entries: 1
#

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English