Extreme Networks EAS 100-24t Switch CLI - Command History Commands; Config Command_History

Command History Commands
Extreme Networks EAS 100-24t Switch CLI Manual
43
Example usage:
To display all commands:
Example usage
To configure the command history:
#dir
..
?
cable_diag ports
clear
clear arptable
clear counters
clear fdb
clear log
clear mac_based_access_control auth_mac
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account
config admin local_enable
config arp_aging time
config arpentry
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config command_history
Purpose Used to configure the command history.
Syntax config command_history <value 1-40>
Description This command is used to configure the command history.
Parameters <value 1-40> - The number of previously executed commands maintained in
the buffer. Up to 40 of the latest executed commands may be viewed.
Restrictions Only Administrator-level users can issue this command.
#config command_history 20
Command: config command_history 20
Success.
#