Extreme Networks EAS 100-24t Switch CLI - Show Igmp_Snooping

Chapter 5: Layer 2 Features
Extreme Networks EAS 100-24t Switch CLI Manual
134
Example usage:
To disable IGMP snooping on the switch:
Restrictions Only Administrator-level users can issue this command.
#disable igmp_snooping
Command: disable igmp_snooping
Success.
#
show igmp_snooping
Purpose Used to show the current status of IGMP snooping on the switch.
Syntax show igmp_snooping {[vlan <vlan_name 32> | vlanid <vidlist>]}
Description This command is used to display the current IGMP snooping status and
configuration on the switch.
Parameters <vlan_name 32> - The name of the VLAN for which to view the IGMP
snooping configuration.
<vidlist> - The VID range of the configuration to be displayed.
Restrictions None.
disable igmp_snooping