Chapter 3: Fundamentals
Extreme Networks EAS 100-24t Switch CLI Manual
26
Example usage:
To disable HTTP:
Example usage:
To save the switch’s current configuration to non-volatile RAM:
To save the switch’s current log to non-volatile RAM:
#disable web
Command: disable web
Success.
#
save
Purpose Used to save changes in the switch’s configuration to non-volatile RAM.
Syntax save {[config | log | all]}
Description This command is used to enter the current switch configuration into non-
volatile RAM. The saved switch configuration will be loaded into the switch’s
memory each time the switch is restarted.
Parameters config – Used to save the current configuration to a file.
log – Used to save the current log to a file. The log file cannot be deleted.
all – Save changes to currently activated configurations and save log. If no
keywords are specified, save the changes to the configuration. If there are no
keywords specified, the changes will be saved to the configuration.
Restrictions Only Administrator-level users can issue this command.
#save config
Command: save config
Saving all configurations to NV-RAM...... Done.
Success.
#
#save log
Command: save log
Saving all log information to NV-RAM...... Done.
Success.
#
To Next Page
Loading...
Need help?
General
