Extreme Networks EAS 100-24t Switch CLI User Manual

802.1X Commands
Extreme Networks EAS 100-24t Switch CLI Manual
247
Example usage:
To configure the timeout option for RADIUS servers.
Example usage:
To display RADIUS settings on the switch:
# config radius parameter timeout 3
Command: config radius parameter timeout 3
Success.
#
show radius
Purpose Used to display the current RADIUS configurations on the switch.
Syntax show radius
Description This command is used to display the current RADIUS configurations on the
switch.
Parameters None.
Restrictions None.
#show radius
Command: show radius
Timeout : 5 seconds
Retransmit : 2
Index IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- -------------- ---------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active eas10024t
3 30.1.1.1 1812 1813 Active extreme
Total Entries : 3
#
show acct_client
Purpose Used to display the current RADIUS accounting client.
Syntax show acct_client
Description This command is used to display the current RADIUS accounting client
currently configured on the switch.
Parameters None.
Restrictions None.

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English