Extreme Networks EAS 100-24t Switch CLI - Disable Asymmetric_Vlan; Show Asymmetric_Vlan; Chapter 5: Layer 2 Features

Chapter 5: Layer 2 Features
Extreme Networks EAS 100-24t Switch CLI Manual
122
Example usage:
To disable asymmetric VLANs:
Example usage:
To display the asymmetric VLAN state currently set on the switch:
disable asymmetric_vlan
Purpose Used to disable asymmetric VLANs on the switch.
Syntax disable asymmetric_vlan
Description This command is used to disable the asymmetric VLAN function on the switch
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
#
show asymmetric_vlan
Purpose Used to view the asymmetric VLAN state on the switch.
Syntax show asymmetric_vlan
Description This command is used to display the asymmetric VLAN state on the switch
Parameters None.
Restrictions None.
#show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN: Enabled
#