Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 4: Management
Extreme Networks EAS 100-24t Switch CLI Manual
92
Example usage:
To display the current DRAM utilization:
Example usage:
To display the current Flash memory utilization:
#show utilization dram
Command: show utilization dram
DRAM Utilization :
Total DRAM : 131,072 KB
Used DRAM : 65,604 KB
Utilization : 50%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization flash
Purpose This command is used to display the Flash utilization statistics.
Syntax show utilization flash
Description This command is used to display the Flash utilization statistics.
Parameters None.
Restrictions None.
#show utilization flash
Command: show utilization flash
FLASH Memory Utilization :
Total FLASH : 16,384 KB
Used FLASH : 7,371 KB
Utilization : 44%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization ports
Purpose This command is used to display the utilization statistics per port.
Syntax show utilization ports {<portlist>}
Description This command is used to display the utilization statistics per port.
Parameters ports – Entering this parameter will display the current port utilization of the
switch.
<portlist> – Specifies a range of ports to be displayed.
Restrictions None.

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English