Extreme Networks EAS 100-24t Switch CLI - Page 62

Chapter 4: Management
Extreme Networks EAS 100-24t Switch CLI Manual
62
Example usage
To display remote table entries in brief mode:
To display remote table entries in normal mode:
Restrictions None.
#show lldp remote_ports 1 mode brief
Command: show lldp remote_ports 1 mode brief
Port ID : 1
---------------------------------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis Id Subtype : MAC Address
Chassis Id : 00-40-66-10-27-00
Port Id Subtype : Local
Port ID : 1/1
Port Description :
#
# show lldp remote_ports ports 1 normal
Command: show lldp remote_ports ports 1 normal
Port ID : 1
---------------------------------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis Id Subtype : MAC Address
Chassis Id : 00-40-66-10-27-00
Port Id Subtype : Local
Port ID : 1/1
Port Description :
System Name :
System Description :
System Capabilities :
Management Address Count : 0
Port VLAN ID : 0
PPVID Entries Count : 0
VLAN Name Entries Count : 0
Protocol ID Entries Count : 0
MAC/PHY Configuration/Status : (None)
Power Via MDI : (None)
Link Aggregation : (None)
Maximum Frame Size : 0
Unknown TLVs Count : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show lldp remote_ports