January 2012 7.11 Additional Parameters for Lathes 1411
Channel selection using MP_plcChannelSelect has been prepared, but it
currently has no function.
MP_plcSpindleSelect
Selection of spindle number by PLC
Available from NCK software version: 597 110-04.
Format: Selection menu
Selection: TRUE
Spindle-dependent input (speed, direction of rotation, etc.)
refers to the spindle number selected by the PLC.
FALSE
Input refers to the spindle assigned to the tool carrier
Default: -
Access: LEVEL3
Reaction: NOTHING
MP_plcChannelSelect
Selection of channel number via PLC
Available from NCK software version: 597 110-04.
Format: Selection menu
Selection: TRUE
Channel-dependent input refers to the channel number
selected by the PLC
FALSE
Input is possible for only one channel
Default: -
Access: LEVEL3
Reaction: NOTHING
To Next Page
Loading...
Need help?
General
