January 2012 7.12 Configuration of the Lathe 1437
Deaktivate spindle S3 with the MP_axisMode parameter in CfgAxis.
Set the MP_plcSpindleSelect parameter in CfgGlbDispSettings to TRUE to
define the spindle (e.g. main spindle, C axis or driven tool) to be assigned
the TSF dialog.
Settings in the configuration editor MP number
Axes
Settings
C axis
[Key name of the C axis]
CfgCAxisProperties
relatedWpSpindle: S1 300803
Settings in the configuration editor MP number
Axes
PhysicalAxis
[Key name of the spindle axis]
CfgAxis
axisMode: NotActive 300105
Settings in the configuration editor MP number
System
DisplaySettings
CfgGlbDispSettings
plcSpindleSelect 604801
To Next Page
Loading...
