HEIDENHAIN MANUALPLUS 620 - Page 1461

January 2012 7.12 Configuration of the Lathe 1461
Expanding the
dashboard display
for rear-side
machining
 To be able to display the position of the opposing spindle C2 in the
dashboard during C-axis operation, copy the dashboard element DB_C1
located in CfgDashboardElemnt and rename it to DB_C2 .
 Then enter the dashboard elements DB_S4 and DB_C2 for displaying the
position of the opposing spindle in the elementList of a dashboard display
(e.g. DB_DEFAULT). The DB_CH1_RSM dashboard element is intended for
displaying the status of rear-side machining and the active datum shift of the
configured mirrored axis.
 Set the MP_plcSpindleSelect parameter in CfgGlbDispSettings entity to
TRUE to define the spindle (e.g. main spindle, opposing spindle, C1/C2 axis
or driven tool) to be assigned the TSF dialog.
Settings in the configuration editor MP number
DisplaySettings
CfgDashboardElemnt
DB_C1
dashboardpicType: ActualCAxisValue
attribut: 0
entityList: C1
DB_C2
dashboardpicType: ActualCAxisValue
attribut: 0
entityList: C2
113100
113101
113102
113103
...
Settings in the configuration editor MP number
DisplaySettings
CfgDashboard
DB_DEFAULT
elementList
113200
113201
Settings in the configuration editor MP number
System
DisplaySettings
CfgGlbDispSettings
plcSpindleSelect 604801