January 2012 4.2 The "Machine Parameters" Mode of Operation 339
With the MP_undoListSize parameter you can specify the number of entries
in the change list:
MP_undoListSize
Specifies the number of entries in the change list
Available from NCK software version: 597 110-04.
Format: Numerical value
Default: 20
Access: LEVEL3
Reaction: NOTHING
With the MP_dispParamNumber parameter you specify whether the number
of machine parameters or the symbolic name is displayed in the change list.
MP_dispParamNumbers
Display the symbolic names or the number of machine
parameters in the change list
Available from NCK software version: 597 110-04.
Format: Selection menu
Selection: TRUE
Number of the machine parameter is displayed
FALSE
Symbolic name of the machine parameter is displayed.
Default: No value, parameter optional (= FALSE)
Access: LEVEL3
Reaction: NOTHING
Finding/Replacing You can search for and replace objects and parameters within the
configuration editor using a dialog box.
Open the dialog box with the FIND soft key.
To Next Page
Loading...
