428 HEIDENHAIN Technical Manual MANUALplus 620
CfgGlbDispSettings
General display settings
plcSpindleSelect
604801
(optional parameter)
Selection of spindle number via PLC
Defines whether spindle selection by the PLC is
to be enabled. The selected spindle is then
entered in a non-editable input field in the TSF
dialog. When the spindle data is saved, it is
assigned only to the selected spindle.
Format: Selection menu
Input:
TRUE:
Spindle-dependent input (speed, direction of
rotation, etc.) refers to the spindle number
selected by the PLC.
FALSE:
Input refers to the spindle assigned to the tool
carrier
Default: FALSE
PLC/Pgm
run is
locked
LEVEL1
1411
plcChannelSelect
604802
(optional parameter)
Selection of channel number via PLC
Defines whether channel selection by the PLC is
to be enabled. Currently without function.
Format: Selection menu
Input:
TRUE:
Channel-dependent input refers to the channel
number selected by the PLC
FALSE:
Input is possible for only one channel
Default: FALSE
PLC/Pgm
run is
locked
LEVEL1
1411
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page
To Next Page
Loading...
