HEIDENHAIN MANUALPLUS 620 - Page 463

January 2012 4.10 List of Machine Parameters 463
readTsfData
116104
(optional parameter)
Reading TSF data with the PLC
PLC reads data from "Set T, S, F" dialog
Format: Selection menu
Input:
 TRUE:
The PLC reads the data on feed rate per
revolution or per minute and constant cutting
speed / spindle speed from the ch_tsf.mch and
sp_tsf.msp tables.
 FALSE:
The control always starts with feed per
revolution and constant cutting speed.
PLC/Pgm
run is
locked
LEVEL1
1406
displayMode
116105
(optional parameter)
Transfer display mode to PLC
Name of the PLC word in which the current
display mode (manual, automatic, reference) is
transmitted to the PLC
Format: String
Input: Double word, max. 500 characters
PLC/Pgm
run is
locked
LEVEL1
1406
setToolPlace
116106
(optional parameter)
Tool pocket preset by the PLC
Name of the PLC word under which the PLC can
define a tool pocket, which is then inserted by the
user interface and displayed.
Format: String
Input: Double word, max. 500 characters
PLC/Pgm
run is
locked
LEVEL1
1406
CfgPlcOperTimes
Configuration of machining time display
displayPlcTimes
105001
MP7237.0
Display PLC operating times
Format: Bit-encoded value
Input: %xxxxxxxx
Bit 0 to bit 7
= PLC time 1 to 8
0: Do not display
1: Display
PLC/Pgm
run is
locked
LEVEL2
1374
resetPlcTimes
105002
MP7237.1
Reset PLC operating times with code number
857282
Format: Bit-encoded value
Input: %xxxxxxxx
Bit 0 to bit 7
= PLC time 1 to 8
0: Do not reset
1: Reset
PLC/Pgm
run is
locked
LEVEL2
1374
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page