HEIDENHAIN MANUALPLUS 620 - Page 480

480 HEIDENHAIN Technical Manual MANUALplus 620
CfgOemPassword
Define OEM-specific code numbers / passwords:
The code numbers or passwords are used to enable functions. Examples:
 Activating the configuration editor with a specific layout
 Displaying soft keys in the MOD dialog
 Evaluating the password / code number in the PLC program
[Key name = OEM-specific code number / password]
If soft keys are to be provided in the MOD dialog permanently, enter the key name Default.
funcList
106901
List of function names (= key names) that are
called by entering the password:
Name of the functions that are called by entering
the password. Enter these names as key names
in CfgModOemSoftkey and
CfgCfgEditActivate.
The password is defined by the key name in
CfgOemPassword.
Format: List [0 to 200]
Input: Max 18 characters
RESET
LEVEL3
368
CfgModOemSoftkey
Soft key in the MOD dialog;
Define a soft key in the MOD dialog, e.g. for activating the configuration editor with a certain layout.
[Key name of the soft key]
The key name must be entered in CfgOemPassword/funcList.
activation
107101
Specifies whether the defined function is a
foreground application.
Format: Selection menu
Input:
 TRUE:
The defined function is a foreground application,
e.g. configuration editor. Set this value if the
soft key opens the configuration editor to
display user parameters.
 FALSE:
Function performed in the background
Default: FALSE
RESET
LEVEL3
368
skPos
107102
(optional parameter)
Position of the soft key in the 3rd menu bar
0= First soft key at left. Menu bars 1 and 2 are
reserved for HEIDENHAIN. Leave empty if no soft
key is to be displayed.
Format: Numerical value
Input: 0 to 7
RESET
LEVEL3
368
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page