HEIDENHAIN MANUALPLUS 620 - Page 500

500 HEIDENHAIN Technical Manual MANUALplus 620
geoTDefCycPath
200408
Path/name for the TOOL DEF cycle
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
geoAutoTCallSycle
200409
Path/name for the automatic TOOL CALL cycle
TOOL CALL after expiration of tool life.
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
geoPalletCtrlCycle
200410
Path/name of the pallet control cycle
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
plcSetPresetCycle
200411
Path/name of the preset set cycle for PLC
module 9090/9281
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
progSelectCycle
200412
Path/name of the program selection cycle
Is called when an NC program is selected via the
file manager.
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
afterMdiCycle
200413
(optional parameter)
Path/name of the trailer program when
leaving MDI
Is called when the Positioning with Manual Data
Input mode is exited.
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
geoTConsCycle
200414
(optional parameter)
Path/name of the cycle for tool-data
consistency
Path of the cycle for loading tool data if the current
tool has changed outside of a program run.
Format: String
Input: Max. 260 characters
RESET
LEVEL3
–
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page