HEIDENHAIN MANUALPLUS 620 - Page 508

508 HEIDENHAIN Technical Manual MANUALplus 620
opmodeAutomatic
203406
List of the dashboards for
Automatic mode
Format: List [0 to 40]
Input: Key name of a dashboard
configured under
DisplaySettings/CfgDashboard
Default: [0]: DB_DEFAULT
[1]: DB_DEFAULT_1
RUN
LEVEL3
1289
opmodeAutomaticLarge
203409
(optional parameter)
List of the expanded dashboards for
Automatic mode
Format: List [0 to 40]
Input: Key name of a dashboard
configured under
DisplaySettings/CfgDashboard
RUN
LEVEL3
1289
opmodeSGTest
203407
(optional parameter)
List of the dashboards for the safety-related-
test operating mode
Format: List [0 to 40]
Input: Key name of a dashboard
configured under
DisplaySettings/CfgDashboard
RUN
LEVEL3
1289
CfgAssignAggregate
Assign tool carrier to the machining channel
assignToolHolder
203901
List of the key names of all tool carriers
Format: List [0 to 3]
Input: Key name of a tool carrier
configured in
CfgAggregateKeys/toolHolder-
Keys
Default: TH1_REV
RESET
LEVEL3
1397
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page