HEIDENHAIN MANUALPLUS 620 - Page 523

January 2012 4.10 List of Machine Parameters 523
speedEncoderInput
400012
MP112
Assignment of a speed encoder input to the
axis
Format: Selection menu
Input:
 none:
No speed encoder connected
 X15...X20:
Speed encoder inputs are X15 to X20
 X80...X83:
Speed encoder inputs are X80 to X83
Default: none
RUN
LEVEL3
657
inverterInterface
400013
MP120, MP121
Assignment of the speed command output to
the axis
Format: Selection menu
Input:
 none:
Not a PWM output, no power module
connected
 X51...X56:
PWM outputs are X51 to X60
 X80...X85:
Only on UEC 11x: Motor connections are X80 to
X85
Default: none
RUN
LEVEL3
657
hsciCcIndex
400014
(optional parameter)
Index of the CC 61xx controller unit in the HSCI
chain
Assign the index based on the position of the
CC 61xx in the HSCI chain:
The first CC after the MC is assigned the number
0, the second one the number 1, etc.
Format: Numerical value
Input: 0 to 4
Default: 0
RUN
LEVEL3
658
driveOffGroup
400015
(optional parameter)
Assignment of the axis to the switch-off group
You can assign the axis to a maximum of 8 switch-
off groups. To do so, insert one line each in the list
and select the desired switch-off group in the
selection menu.
Format:: List [0 to 7]
Input: Name of the switch-off group
Group1 to Group8, or None
RUN
LEVEL3
597 110-03
218
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page