HEIDENHAIN MANUALPLUS 620 - Page 587

January 2012 4.10 List of Machine Parameters 587
ToolHolder
[Key name of the too carriers]
CfgTHDescription
Description of the tool carrier
ordinalNr
600203
Reference number of the tool carrier
Enter the reference number of the tool carrier.
Format: Numerical value
Input: 0 to 9
Value as a whole number (integer)
Default: 1
RESET
LEVEL3
1397
type
600204
Type of tool carrier
Enter the type of tool carrier.
Format: Selection menu
Input: None
Turret
MultiFix
Default: MultiFix
RESET
LEVEL3
1397
spindleNr
600207
Spindle number of the driven tool.
Enter the spindle number to be assigned to the
driven tool. The selection menu refers to the
spindle key in CfgAxes/spindleIndices. The
"Spindle S1" is reserved for the main spindle and
cannot be assigned here.
Format: Selection menu
Input: NoSpindle
Spindle-S2
Spindle-S3
Spindle-S4
Spindle-S5
Spindle-S6
Default: NoSpindle
RESET
LEVEL3
1398
maxSwivelPosition
600208
Turret swivel positions
Enter the number of tool turret swivel positions.
Format: Numerical value
Input: 1 to 99
Value as a whole number (integer)
Default: 12 (turret)
1 (Multifix)
RESET
LEVEL3
1398
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page