20
CONTROL COMMAND
20-10
Command table (Continued) D
Remote jack (CI-V) information
Cmd. Sub cmd. Data Description
1A 05 0211 see p. 20-14 Send/read the GPS-A comment
0212 00 to 08 Send/read the GPS Auto TX inter-
val setting
( 00=OFF, 01=5 sec., 02=10 sec.,
03=30 sec., 04=1 min., 05=3 min.,
06=5 min., 07=10 min.,
08=30 min.)
0213 00/01 Send/read the QSO Log setting
(00=OFF, 01=ON)
0214 00/01 Send/read the RX History Log func-
tion setting
(00=OFF, 01=ON)
0215 00 to 02 Send/read the QSO/RX Log CSV
format setting (Separator/Decimal)
( 00=Separator is “,” and
Decimal is “.”,
01=Separator is “;” and
Decimal is “.”,
02=Separator is “;” and
Decimal is “,”)
0216 00 to 02 Send/read the QSO/RX Log CSV
format setting (Date)
( 00=“yyyy/mm/dd”,
01=“mm/dd/yyyy”,
02=“dd/mm/yyyy”)
0217 00/01 Send/read the Weather Alert setting
(USA only)
(00=OFF, 01=ON)
0218 00 to 02 Send/read the Memory Name
Display setting
[System language: English]
(00=OFF, 01=ON)
[System language: Japanese]
(00=OFF, 01=Normal, 02=Large)
0219 00/01 Send/read the Display Type setting
for the DR mode
(00=Normal, 01=Large)
0220 00 to 02 Send/read the Compass Direction
setting
( 00=Heading Up, 01=North Up,
02=South Up)
06 see p. 20-14 Send/read the DATA mode setting
1B 00 see p. 20-14 Send/read the Repeater tone
frequency
01 see p. 20-14 Send/read the Tone squelch fre-
quency
02 see p. 20-14 Send/read the DTCS code and
polarity
07 see p. 20-14 Send/read the CSQL code (DV
mode)
1C 00 00 Send/read the Transceiver’s status
(RX)
01 Send/read the Transceiver’s status
(TX)
01 00 Send/read Antenna tuner OFF
(through)
01 Send/read Antenna tuner ON
02 Send/read the Manual tuning selec-
tion
02 00 Send/read Transmit frequency
monitor check OFF
01 Send/read Transmit frequency
monitor check ON
Cmd. Sub cmd. Data Description
1E 00 Read number of available TX fre-
quency band
01 see p. 20-12 Read the TX band edge frequen-
cies
1E 02 Read number of User-set TX fre-
quency band
03 see p. 20-12 Send/read the User-set TX band
edge frequencies
1F 00 see p. 20-14 Send/read the DV MY call sign
01 see p. 20-14 Send/read the DV TX call signs
02 see p. 20-14 Send/read the DV TX message
20 00 00 00/01*
3
Send/read the Auto DV RX Call
signs output setting
(00=OFF, 01=ON)
01 see p. 20-15 Output the DV RX Call signs
02 see p. 20-15 Read the DV RX Call signs
01 00 00/01*
3
Send/read the Auto DV RX mes-
sage output setting
(00=OFF, 01=ON)
01 see p. 20-15 Output the DV RX message
02 see p. 20-15 Read the DV RX message
02 00 00/01*
3
Send/read the Auto DV RX status
output setting
(00=OFF, 01=ON)
01 see p. 20-15 Output the DV RX status
02 see p. 20-15 Read the DV RX status
*
3
Output setting is automatically turned OFF after turning the
power OFF, then ON.
To Next Page
Loading...
