Keysight Technologies M8000 Series

134 Keysight M8000 Series of BER Test Solutions User Guide
4 User Interface - M8020A Display Views
On Analyzer Side
• Data In and /Data In - Differential or single-ended, full-rate data input
from the device under test. Unused input should be terminated into
50 . (2.4 mm, female). These ports are AC coupled.
• Data Out 1 and Data Out 2 - Single-ended, half-rate data outputs to
the M8041A module (3.5 mm, female).
• Clk Out - Half-rate Error Analyzer clock output, synchronous with
analyzer sampling.
• Clk In - Half-rate, Error Analyzer clock input. Allows external clocking
of the Error Analyzer.
M8062A Configuration
The M8062A Configuration dialog provides configuration settings for
M8062A. To open the M8062A Configuration dialog:
•Go to Menu Bar > System and then click Module View.
• Locate the M8062A module.
•Click Configuration... button.
The M8062A Configuration dialog will appear as shown in the
following figure:
Ω