Keysight M8000 Series of BER Test Solutions User Guide 231
User Interface - M8020A Display Views 4
3 Execute the command
:EMODulesDCAM1:DEVice "N1076A-US12345678"
Select slot number and serial number as required. The example above
is using slot 1 (DCAM1) and the serial number US12345678.
4 Execute the command
:EMODules:SLOT1:SELection DCAM
Make sure to use the same slot number (1 in this example) as for the
previous command.
To Next Page
Loading...
