232 Keysight M8000 Series of BER Test Solutions User Guide
4 User Interface - M8020A Display Views
5 Ensure that N1010A FlexDCA is configured in Keysight Command
Expert and the alias is being set.
6 Start M8070A and use the clock recovery in offline mode.
The procedure for offline clock recovery configuration is similar to online
one and can also be selected as clock source for a M8046A error detector.
If the M8046A error detector is online, then a clock with the correct
frequency must be supplied at the CLK IN connector.
In case of offline clock recovery, all commands will executed in the similar
way line in online case with the exception of the lock status. The clock
recovery will never report unlocked when in offline simulation mode.
To Next Page
Loading...
