384 Keysight M8000 Series of BER Test Solutions User Guide
7 Setting up Patterns
• Select the ports or locations and then click Select. The settings
option for each port or location will be added to the Block Data
functional block.
• Click Clear if you want to remove port or location specific patterns
and use single pattern for the block.
Compare Feature
The Compare feature allows you to compare the block data for a particular
sequence. It provides you the freedom to modify the sequence without
deleting the blocks.
When to use/not use this feature
Suppose you created a sequence with multiple blocks. Now, if you want to
exclude particular block(s) from that sequence while comparing, instead of
deleting the whole sequence, just set the compare functionality “OFF”
which in-turn will disable that particular block(s) from the sequence for
comparison.
Block Settings
The Block Settings section allows you to:
• Click on the corresponding ON/OFF toggle button to turn on the
following features:
• CDR
• Error Insertion
To Next Page
Loading...
Need help?
General
