Keysight M8000 Series of BER Test Solutions User Guide 635
Licenses 10
5 After reboot start the browser and use the use following
http://localhost:8090/ address again.Now you should see the web
configuration page of the lmadmin.
6 However, if you see the message ‘The page can’t be displayed …’ again
the firewall of windows has block the access. You may need to allow
certain executable and/or the port number to go through the firewall.
For firewall settings, refer to Firewall Configuration for Licensing on
page 631.
7 In the login page, if you have not previously set up a login, sign in as
“user admin” with password “admin”. You will then be required to
change the password.
8 Start the browser and use the use following http://localhost:8090/
address again.
9The lmadmin is installed as service. To check the state of the service,
right click on the Computer icon on the desktop and then select
Manage. Click on Services and check if service lmadmin is started.
To Next Page
Loading...
