Leibinger JET2neo - Explorer Tools; Figure 49 Explorer (Tools)

Group 7 Data entry/Programming Page 101
JET2 neo Release R1.12 en
 With the button <Clone internal memory> (5) all data of the JET2neo are duplicated
to an external data carrier.
 The button <Close> (6) closes the explorer.
7.2.2.2.3 Explorer tools
Figure 49
Explorer (Tools)
1 – Tool <Copy to USB-Stick>
4 – Tool <Select none>
2 – Tool <Copy to internal memory>
5 – Tool <Delete>
3 – Tool <Select all >
Pos.
Tool
Function
1.
Copy to USB-Stick
Copy marked data to an external memory device.
2.
Copy to internal
memory
Copy marked data from an external memory device to the
internal memory of the JET2neo.
3.
Select all
Selects all data in the active selection window.
Annotation:
The selection of several data happens by clicking on
the accordant designation.
4.
Select none
Cancels the selection of all data of the active selection
window.
Annotation:
The selection of several data is cancelled by clicking
on the accordant designation.
5.
Delete
Deletes all marked data in the active selection window.
3
1
5
2
4