Group 8 Job editor Page 171
JET2 neo Release R1.12 en
The printing data is created and saved as a job in the job editor. A variety of Windows® similar
tools make the operation easier. A job can consist of a lot different objects e.g. text blocks,
graphics or barcodes whose contents and characters are changeable.
Functions as matrix, size, bold type, rotation etc. can be assigned to every single object
irrespectively of each other. Current jobs can be edited or created new also during running
production. All jobs are displayed in the WYSIWYG mode.
Note:
WYSIWYG = What you see is what you get (real display of print image)
Menu bar (1): The following functions and the following Editor sub-menus can be
opened with the buttons in the menu bar:
Button <Save> (2): This button saves the entries and changed made under the
currently loaded job or under a new job name.
Button <Parameter settings> (3): This button makes the job settings necessary for a
print job (e.g. PrintGo-Distance, rotary encoder source, alignment, etc.).
Further information about how to make the individual parameter
settings and their effects can be found in the chapters Parameter
setting tools and Parameter settings (page 188)!
Button <Object settings> (4): This button assigns various object settings (e.g. font,
contrast, alignment etc.) to the selected print element.
You will find further information regarding the several parameter
settings and its effects in the chapter Parameter settings (page 188)!
To Next Page
Loading...
