Leibinger JET2neo - Functional Area Settings; Figure 59 - Functional Area Settings

Page 114 Data entry/Programming Group 7
Release R1.12 en JET2 neo
7.2.3 Functional area Settings
In the functional area <Settings> the following submenus are available:
 Basic settings
 I/O settings
 Interface settings
 Password settings
 Hydraulic settings
Furthermore the password prompt can be activated or deactivated.
Figure 59
Functional area „Settings“
1 – Button <Basic settings>
4 – Button <I/O settings>
2 – Button <Interface settings>
5 – Button <Password settings>
3 – Button <Hydraulic settings>
6 – Control box <Password active>
1
2
3
4
6
5
4