Leibinger JET2neo - Edit Current Job (Direct Selection); Figure 101 - Edit Current Job (Direct Selection)

Page 168 Data entry/Programming Group 7
Release R1.12 en JET2 neo
7.3 Edit current job (Direct selection)
With the button <Edit current job> in the menu bar you can edit the current job.
Figure 101
Edit current job (Direct selection)
1 – Button <Edit current job>
2 – Menu <Job editor>
Proceeding:
 Press the button <Edit current job> (1).
 The menu <Job editor> (2) opens to change the printing data.
 Carry out the requested changes and save it. You will find further information regarding the
memory process in the group Jobeditor in the chapter Save job/Save job as (page 253).
You will find further information regarding the operation of the job editor
in the group Job editor.
2
1