Leibinger JET2neo - Figure 6 - Grounding Schematic and Grounding Point

Group 5 Transport/Start up Page 33
JET2 neo Release R1.12 en
Please note, that the grounding point (6) is hidden behind the round
grounding-symbol-label (7) on the lower left hand side of the cabinet of the
printer.
Figure 6
Grounding schematic and grounding point
Grounding schematic
ground / earth
1 – Printer cabinet
4 – Grounding line
7 – Grounding symbol
2 – Installation (machine)
5 – Umbilical
(label)
3 – Print head
6 – Grounding point (M6)
Grounding instructions
 A separate grounding line (min. cable cross-section 2.00 mm
2
) to the printer cabinet
must be installed before the print head is mounted in the installation and before the
printer is plugged to the power supply.
 The connection must be carried with a solid bonding that corresponds with existing
guidelines.
Annotation: A suitable grounding cable is available optionally (accessories).
 The installation (machine) and the printer must have the same potential/ground.
5
7
4
6
1
3
2
(earth)