At the end of the bleeding process or after cancelling the process, the basic menu (5)
opens.
Note:
For starting the device the job which has been used at last will be loaded
automatically.
Touch the dark Touch-Display (1) at any point.
Period of touching approx. 2 sec..
The devices turns on and the message <Initialization> (2) is displayed.
After the initialization the device starts with the bleeding of the system automatically.
During the process the message <Bleeding> (3) is displayed. The bleeding takes
between 1 – 5 min. The process can be canceled by pressing the button <Cancel>
(4).
At the end of the bleeding process or after cancelling the process, the basic menu (5)
opens.
Note:
The start of the device happens in the logged-out status (no operator will be
logged on) but the job which has been used at last will be loaded automatically.
Press the button <Main menu> (6) in the menu bar. Call up the functional area „Extra“
(7) by pressing on the corresponding register card.
Press the button <Login> (8).
The window <Password query> (9) is called up.
Click into the input field <Password> (10) of the window. A keyboard field (11) opens
for entry.
Enter your defined password.
Press the button <Return > (12) of the keyboard field to finish the input.
You will find further information regarding the operation with keyboard
fields in the chapter Keyboard fields (page 62)!
To Next Page
Loading...
