Page 18 Safety Group 2
Release R1.12 en JET2 neo
Indicates important user information
for safe and effective working.
Indicates recommendations for use
and other useful pieces of information.
The high performance printer JET2neo serves exclusively the contact-free marking, inscribing
and coding of surfaces using the continuous ink jet process.
The high performance printer can be used on the most varying materials (e.g. metal, synthetic
material, glass, paper, wood, pressed materials, rubber etc.) with both, smooth as well as
uneven, rough and stepped surfaces.
Only non pigmented inks can be processed!
The intended use of this device also includes the observance of all instructions
in this manual.
Using the installation for other purposes is considered contrary to its
intended use!
For safety reasons conversions and alterations are only admissible following
consultation with the manufacturer. Repairs to the device must only be carried
out with original replacement parts. The manufacturer shall not be liable for
damage resulting from use for other than the intended purpose or misuse.
Caution – Danger of explosion!
The device should be only operated outside of explosive areas!
The installation has to be carried out according to the installation
instructions of the manufacturer!
Caution – Danger of explosion!
Precautions regarding electrostatics have to be carried out!
To Next Page
Loading...
