Leibinger JET2neo - Counter Increment (Methods); Figure 138 - Counter Settings (Increment Methods)

Page 228 Job editor Group 8
Release R1.12 en JET2 neo
8.6.3.1.6 Counter increment (methods)
With the pop-up window <Counter increment> you can determine the method at which
event the counter value should be changed (incremented or decremented).
Figure 138
Counter settings (Increment methods)
 with PrintGo:
The change in value of the counter happened with each the PrintGo-signal.
 with textend:
The change in value of the counter happens after the print out was made.
 extern (external signal):
The change in value happens by an external signal (interface X4).