Leibinger JET2neo - Job (Editor) Management; Save Job;Save Job as

Group 8 Job editor Page 253
JET2 neo Release R1.12 en
8.8 Job (editor) management
The editor management allows the following functions:
 Save job
 Save job as
 Close editor
8.8.1 Save job/Save job as
The <Save> function enables:
1. Saving a job opened for editing under the current name.
2. Saving a job currently opened for editing under a new name or a certain name.
3. Saving a newly created job.
Attention!
If a job is saved under an already existing data file name, no further safety
query happens. The existing data will be overwritten.
Proceeding
 Press the button <Save> (1) in the menu bar.
 The window <Save Job> (2) is faded in.
 The names of the already existing graphics are displayed in the data file selection field
(3). With the pop-up window <Search in> (4) you can select the different memory
devices.
 Click in the display <Filename> (5). A keyboard field (6) opens for input.
You will find further information regarding the operation with
keyboard fields in the chapter Keyboard fields (page 62)!
 Enter the requested name.
 Press the button <Return > (7) of the keyboard field. The entered name is taken over
to the display <Filename> (5).
 Press the button <OK ()> (8) to finish the saving process or press the button <Close>
(9) to abort the process.