Leibinger JET2neo - Definition of Password; Figure 78 - Selection of User Level; Selection of User Level

Page 138 Data entry/Programming Group 7
Release R1.12 en JET2 neo
7.2.3.4.2 Selection of user level
Level of access authorization)
With the pop-up window <Level> (1) you can select the user level for which the user rights
should be activated as well as how the password should be defined.
Figure 78
Selection of user level (Level of access authorization)
1 – Pop-up window <Level>
7.2.3.4.3 Definition of password
In the input field <Password> (1) you can enter the password for the current user level or
you can display an already defined password.
Proceeding:
Example: The password „Leibinger“ should be defined.
 Click in the input field <Password> (1). A keyboard field (2) opens for input.
You will find further information regarding the operation with keyboard
fields in the chapter Keyboard field (page 62)!
 Enter the password „Leibinger“.
 Press the button <Return > (3) of the keyboard field to finish the input. The input is
displayed in the input field <Password> (1).
Attention! A final taking over does only happen if the menu is closed
with the button <OK ()> (4)!
 Press the button <OK ()> to close the menu and take over the settings.
 The window <Password query> (5) opens.
1