Group 8 Job editor Page 251
JET2 neo Release R1.12 en
The buttons <Scroll> (3) allows the scrolling of the display field <Replacement>.
With the button <Default> (4) you can reset the definitions of the replacements to the
standard values.
Note:
The resetting of the replacements has only effects on the current created or edit
job or on the selected printing element!
With the button <OK ()> (5) you can take over the inputs and close the menu.
The button <Close> (6) ends the menu without saving the inputs.
8.7.1 Carry out replacements
E.g.:
The month numbers (01, 02…..09….) of the date element which is currently
defined in the job should be replaced by month specifications (01=JAN;
02=FEBR….09=SEP…).
After the selection of the element press the button <Object settings> (1) in the menu
bar.
The menu <Object settings (Date/Time)> (2) is faded in.
Press on the register card <Replacements> (3) to select the functional area
„Replacements “.
Press on the arrow button of the pop-up window <Type> (4). The Pop-up window
opens for selection.
Now select the element type „Months“(5).
Click on the several setting fields <Replacement> (6). A keyboard field (7) opens for
input. Enter the accordant values.
Press each time the button <Return > (8) of the keyboard field to take over the
replacements to the setting field.
You will find further information regarding the working with keyboard
fields in the chapter Keyboard fields (page 62)!
Press the button <OK ()> (9) to take over the inputs and to close the menu or press
the button <Close> (10) to leave the menu without saving the inputs.
In the menu <Job editor> the date specifications with replacements are displayed.
To Next Page
Loading...
