Provides the bonding of date- and time specifications and definition of the expiry time of
the font parameters and of the display options.
Further more accordant substitutions (numbers, letters or designations) for the date- and
time values can be generated to get an operating-specific display or coding of the
specifications.
Note:
“Expiry time” is the time which elapses until the product cannot be used any-more.
Example:
Additionally to an existing fix text „A“ the current date should be printed and to the
existing fixt text „V“ the resulting expiry date.
The date specification should be in the format „Day/Month/Year”.
The expiry time is 15 days.
Press the icon <Date/Time> (1).
The menu <Object Settings (Date/Time)> (2) is faded in.
Carry out the requested settings for the font parameters and display options in the
functional area <Global settings> (3). You will find further information in the Chapter
Object settings.
Note:
In the setting fields <Position X/Y> (4 ) the system shows automatically the
next possible position of the object after an existing fix text. This position can or
has to be changed depending on the input situation!
Now change to the functional area <Date/Time> (5). The selection of the functional
area happens by clicking on the accordant register card (13).
Press the following buttons (6-9) in the appropriate sequence to generate the current
date input:
„Day“ „/“ „Month“ „/“ „Year“
The formatting of the inputs is shown on the display field <Content> (10).
Press the button <OK ()> (14) to take over the inputs and to close the menu or press
the button <Close> (15) to leave the menu without saving the inputs.
To Next Page
Loading...
