Leibinger JET2neo - Functional Area Job; Create a New Job; Figure 31 - Functional Area Job

Group 7 Data entry/Programming Page 77
JET2 neo Release R1.12 en
7.2.1 Functional area Job
In the functional area <Job> following options are available:
 Create new job
 Load job to print
 Edit current job
 Reset all job counters
 Open job to edit
 Save counter (states)
 Create new job list
Figure 31
Functional area „Job“
1 – Option <Create new job>
5 – Option <Load job to print>
2 – Option <Edit current job >
6 – Option <Reset all job counters>
3 – Option <Open job to edit>
7 – Control box <Save counters>
4 – Option <Create new job list>
7.2.1.1 Create a new job
With the option <Create new job> you can create a new job. For creation the job editor
opens where you can create the printing data and save it as a job. A variety of Windows®
similar tools make the operation easier.
Proceeding:
 Press the button <Create new job> (1).
 The menu <Job editor> (2) opens to create the printing data.
 Carry out the requested inputs and save the job data. You will find further information
regarding the memory process in the group Job editor in the chapter Save job/Save
job as (page 253).
1
3
2
4
7
6
4
5