Leibinger JET2neo - Weekly Servicing Work; Annual Servicing Work

Page 268 Equipping/Maintenance Group 10
Release R1.12 en JET2 neo
10.2.2 Weekly servicing work
The weekly servicing work includes the checking of the spindles and of the guides of the
nozzle seal for dirt. If necessary the components must be cleaned as described in the
chapter Cleaning.
This work must only be carried out by trained personnel or by
Leibinger service technicians!
10.2.3 Annual servicing work
The manufacturer recommends a regular servicing interval of 6–12 months.
This work must only be carried out by trained personnel or by
Leibinger service technicians!