Leibinger JET2neo - Edit Current Job; Figure 32 Create a New Job; Open Job to Edit

Page 78 Data entry/Programming Group 7
Release R1.12 en JET2 neo
Figure 32
Create a new job
1 – Button <Create new job>
2 – Menu <Job editor>
You will find further information regarding the operation of the job editor
in the group Job editor.
7.2.1.2 Edit current job
With the option <Edit current job> you can edit the current job.
Further information about the procedure can be found in the chapter Edit
current job (Direct selection) (page 168) and in the group Job editor!
7.2.1.3 Open job to edit
With the option <Open job to edit> you can open an existing job for editing. For selection
of a job the window „Job selection“ is faded in.
Proceeding:
 Press the button < Open job to edit> (1). The window <Job selection> (2) is faded
in.
 Select the requested job in the selection field <Job list> (3). With the pop-up window
<Search in> (4) you can select the various memory locations.
 The name of the selected job is now shown on the display <Filename> (5). Additionally
a preview of the printing job is faded in on the display <Job preview> (7).
1
2