Leibinger JET2neo - Display Settings; Figure 114 - Object Settings (Display Options)

Group 8 Job editor Page 183
JET2 neo Release R1.12 en
8.4.7 Display settings
With this function you can activate different display options.
The following display options are available:
 mirrored
 inverted
 alternating
 proportional
An activated option is displayed with a  in the control box.
Figure 114
Display options
Display:
normal
proportional
Display: alternating
1. Print
2. Print
3. Print
etc.
Display:
normal
horz. mirrored
normal
inverted
 Mirrored display: The printing element is mirrored horizontally.
 Inverse display: The printing element is displayed inverse.
Example:
For printing a black ink is used on a white medium.
Without the option <Inverse> the letters of the printing text are written in black.
With the option <Inverse> the area around the letters will be blacken and the characters
stay white.
 Alternating display: Every second print out is displayed mirrored horizontally and
vertically.
 Proportional display: The printing object is displayed proportionally that means
unneeded blank fields between the single characters of the printing element can be
avoided.